Recording with timecodes to file in Russian
Recording with timecodes to file in Russian: send the file and get the text with the timecodes. One file may be up to 30 minutes on the free plan, no minute limit on Pro.
Transcribsi reads the Recording with timecodes from the Audacity in Russian and writes the minutes. The file comes off the platform as it is, one file may be up to 30 minutes, and the free plan gives 3 files a day.
How to get the file and turn it into file
- 1
Take the file out
The recording is exported at once to WAV or AIFF as a safety copy, and that file is what goes to the service
- 2
Upload the file
The file of the Recording with timecodes is attached in the widget of this page, and the speech is marked as Russian; the answer comes back as the minutes.
- 3
Ask for the minutes
The transcript of the Recording with timecodes goes to the instruction that is written for the minutes, and the sections of the answer are Attendees, Agenda, Discussion by item.
- 4
Name the language of the speech
The speech of the Recording with timecodes is Russian, one of the 99+ languages the engine reads, and the widget is left on Russian while the minutes is written.
- 5
Check the file before the upload
Audacity labels a point, a single moment of the audio, or a region, a span with a start and an end time; a point label is a region label with the same start and the same end
What comes back from the engine
- TXT
One segment per line, the way a person wrote it down. It is the format to paste into a ticket, a chat or a document.
- TXT, CSV
The start and the end time of every segment, and the speakers named separately when you ask for it.
- SRT, VTT
SRT and VTT with the time of every line, so the recording can carry its own subtitles.
- Markdown, DOCX
The transcript is edited through the API and exported as Markdown for a wiki, or as DOCX for a review.
What Audacity keeps, and what it says about it
- Where the file is
A Label Track is an additional track of the project: the labels in it mark points or regions of the audio tracks, and the label track itself holds no audio.
- What the file is
The Time Toolbar is read-only and shows the current position of the play head or of the record head, and while the recording runs it follows the record head.
- What can go wrong
The recording of Audacity is taken from the sound input of the computer or from a mixer, and the source is chosen in the Audio Setup Toolbar or in the Audio Settings Preferences.
- What the platform says
Audacity labels a point, a single moment of the audio, or a region, a span with a start and an end time; a point label is a region label with the same start and the same end.
- What the platform says
The labels are imported and exported as text label files, and the text of a label can be kept for annotation or for transcription.
- Length of one file
up to 30 minutes on the free plan, no minute limit on Pro
- Free plan
$0: 3 files a day, up to 30 minutes per file, no card
- Pro plan
$10 a month when you pay yearly ($120 a year), or $20 a month
What the recording does not give you
The Recording with timecodes from the Audacity holds the voices and the order of the words. The recording of Audacity is taken from the sound input of the computer or from a mixer, and the source is chosen in the Audio Setup Toolbar or in the Audio Settings Preferences. From that text comes the minutes, in the sections Attendees, Agenda, Discussion by item.
Tips
Read the sections of the minutes before you send it on.
A recording of the Recording with timecodes in Russian is read as Russian.
Check who may download the file of the Recording with timecodes.
The Time Toolbar is read-only, so the audio position cannot be reset with it: the Selection Toolbar is needed for that.
Questions about Recording with timecodes and file
What does the Audacity keep for the Recording with timecodes?
A Label Track is an additional track of the project: the labels in it mark points or regions of the audio tracks, and the label track itself holds no audio. The file of the Recording with timecodes is the input of the engine, and the minutes is written from it.
What does the Audacity say about the Recording with timecodes?
A very large number of labels in one project, hundreds or thousands, can make Audacity noticeably sluggish. The engine reads the Russian speech of the Recording with timecodes and writes the minutes from that text.
Who reads the minutes after the Recording with timecodes is sent?
the person who keeps the record. The transcript of the Recording with timecodes is read first, and the minutes comes out of it in the sections Attendees, Agenda, Discussion by item.
Is there a limit to the length of the Recording with timecodes?
One file of the Recording with timecodes may be up to 30 minutes on the free plan; the free plan gives 3 files a day.
Is a link enough for the Recording with timecodes?
Bring the file of the Recording with timecodes to your own disk and upload it here; the engine returns the minutes with the time of every line.
Related pages
The same task on another recording, with the same steps and the same sections.
Meeting minutes ready to fileThe page of the task: the instruction that is written for it and an example of the answer.
Transcribe audio to textWhat the service does with a file: the formats of the export, the limits and the plans.
Sources
- MAudacity manual: Label Tracks (read 2026-10-25)manual.audacityteam.org · checked
- MAudacity manual: Time Toolbar (read 2026-10-25)manual.audacityteam.org · checked
- MAudacity manual: Recording (read 2026-10-25)manual.audacityteam.org · checked
- TTranscription service page (read 2026-10-25)transcrib.si · checked
- TPricing page (read 2026-10-25)transcrib.si · checked
Reading: 4 minutesUpdated Transcribsi editorial team
Drop a recording — the text arrives in a minute
Speakers by name, a time on every line, export to TXT, SRT, VTT, CSV and Markdown.