Recording with timecodes to a blog post in Russian
Recording with timecodes to a blog post in Russian: send the file and get the text with the timecodes. One file may be up to 30 minutes on the free plan, no minute limit on Pro.
What the Audacity stores is what the engine needs. The Russian speech becomes the blog post in the sections Headline and lead, Outline, Draft; one file may be up to 30 minutes, and 3 files a day are free.
How to get the file and turn it into a blog post
- 1
Take the file out
The recording is exported at once to WAV or AIFF as a safety copy, and that file is what goes to the service
- 2
Hand the file over
The recording of the Recording with timecodes is attached to the widget of the page with the language of the speech set to Russian, and the blog post comes back as a file of text.
- 3
Apply the instruction of the task
The text of the Recording with timecodes is given to the instruction of the blog post, and the answer is written in the sections Headline and lead, Outline, Draft, one after another.
- 4
Name the language of the speech
The recording of the Recording with timecodes is in Russian, and that is one of the 99+ languages the engine reads; the setting of the widget says Russian and the blog post follows.
- 5
Check the file before the upload
Audacity labels a point, a single moment of the audio, or a region, a span with a start and an end time; a point label is a region label with the same start and the same end
What comes back from the engine
- TXT
One segment per line, the way a person wrote it down. It is the format to paste into a ticket, a chat or a document.
- TXT, CSV
The start and the end time of every segment, and the speakers named separately when you ask for it.
- SRT, VTT
SRT and VTT with the time of every line, so the recording can carry its own subtitles.
- Markdown, DOCX
The transcript is edited through the API and exported as Markdown for a wiki, or as DOCX for a review.
What Audacity keeps, and what it says about it
- Where the file is
A Label Track is an additional track of the project: the labels in it mark points or regions of the audio tracks, and the label track itself holds no audio.
- What the file is
The Time Toolbar is read-only and shows the current position of the play head or of the record head, and while the recording runs it follows the record head.
- What can go wrong
The recording of Audacity is taken from the sound input of the computer or from a mixer, and the source is chosen in the Audio Setup Toolbar or in the Audio Settings Preferences.
- What the platform says
Audacity labels a point, a single moment of the audio, or a region, a span with a start and an end time; a point label is a region label with the same start and the same end.
- What the platform says
The labels are imported and exported as text label files, and the text of a label can be kept for annotation or for transcription.
- Length of one file
up to 30 minutes on the free plan, no minute limit on Pro
- Free plan
$0: 3 files a day, up to 30 minutes per file, no card
- Pro plan
$10 a month when you pay yearly ($120 a year), or $20 a month
What the recording does not give you
The recording of Audacity is taken from the sound input of the computer or from a mixer, and the source is chosen in the Audio Setup Toolbar or in the Audio Settings Preferences. The Russian speech of the Recording with timecodes is read first, and the blog post is what the author of the post gets out of the transcript.
Tips
Read the sections of the blog post before you send it on.
The engine does not translate the Recording with timecodes from Russian.
Rename the file of the Recording with timecodes before you send it.
The Time Toolbar is read-only, so the audio position cannot be reset with it: the Selection Toolbar is needed for that.
Questions about Recording with timecodes and a blog post
Which problems can come with the Recording with timecodes?
A Label Track is an additional track of the project: the labels in it mark points or regions of the audio tracks, and the label track itself holds no audio. The engine does not change the file of the Recording with timecodes; it reads it as it is and writes the blog post.
What does the Audacity keep for the Recording with timecodes?
A very large number of labels in one project, hundreds or thousands, can make Audacity noticeably sluggish. The file of the Recording with timecodes is the input of the engine, and the blog post is written from it.
How is the blog post built from the Recording with timecodes?
The engine reads the Russian speech and the instruction writes the blog post in the sections Headline and lead, Outline, Draft; every line comes from the transcript of the Recording with timecodes.
How long may the file be, and how much is free?
One file may be up to 30 minutes on the free plan, and the free plan gives 3 files a day for the blog post.
Where does the file of the Recording with timecodes wait?
On the Audacity. The facts of the table above name the place where the file of the Recording with timecodes is kept and the way it comes off.
Related pages
The same task on another recording, with the same steps and the same sections.
Video to a blog postThe page of the task: the instruction that is written for it and an example of the answer.
Transcribe audio to textWhat the service does with a file: the formats of the export, the limits and the plans.
Sources
- MAudacity manual: Label Tracks (read 2026-10-25)manual.audacityteam.org · checked
- MAudacity manual: Time Toolbar (read 2026-10-25)manual.audacityteam.org · checked
- MAudacity manual: Recording (read 2026-10-25)manual.audacityteam.org · checked
- TTranscription service page (read 2026-10-25)transcrib.si · checked
- TPricing page (read 2026-10-25)transcrib.si · checked
Reading: 4 minutesUpdated Transcribsi editorial team
Drop a recording — the text arrives in a minute
Speakers by name, a time on every line, export to TXT, SRT, VTT, CSV and Markdown.